R35057
Wire type: Wire
Number of wires: 8
Cable type: Single cable
Category: Cat. 6
Jacket material: LSZH
Cable jacket characteristics: zero-halogen
Stranding: 4 pairs
Wire diameter: AWG 23
Shielding: U/UTP

833675
Pair-shielded 100 Ohm installation cable, suitable for transmission frequencies of up to 650 MHz, 4 x 2 (AWG 23). Compliant with standards ISO/IEC 11801 ed. 2.2, EN 50173-1: May 2011 (DIN EN 50173-1), DIN 44332-5, IEC 61156-5 2nd Ed., EN 50288 x-1, 10GBASE-T in acc. with IEEE 802.3™ Section Four. Low-smoke in acc. with IEC 61034, flame-retardant in acc. with IEC 60332-3-22 and halogen-free in acc. with IEC 60754-2.

Double sheath with total thickness of 1,65 mm
Extremely resistant to mechanical damage and environmental influences
Resistant to moisture, water and UV radiation
Cable core is identical with construction of KE300S24-Eca
Enables RJ45 connectors to be mounted directly to a cable
Enables transmission of all high-speed protocols including 1000BASE-T
Tested in a bandwidth up to 300 MHz

- 19“ PDU, 9 x 230V, Schuko Number of ports: 9,
- Over voltage protection: german style sockets
-(DIN 49440) universal german and french style cable plug
-LED for power indications
-Set of M6 screws and captive nuts (4 pcs)

Terminates 4-pair, 24-26AWG Solid or Stranded Shielded Twisted Pair Patch Cable
Compatible with Cable Jacket Diameters from 5.5 to 6.5mm and Conductor Wire Sizes up to 1mm
Works with Most Available RJ45 Crimp Tools
Contacts Plated with 50 Microinches of Gold for Superior Performance
Metal-shielded Shell Eliminate Cross-talk and Prevents Electromagnetic Interference (EMI)
Robuste Construction That is Rated as 750 Mating Cycles

Stand-alone Use, or Mounted in a Faceplate or Patch Panel
Connect Two RJ45 Patch Network Cables to Make a Longer Patch Cable
Meets EIA/TIA Cat6 Specifications, Backwards Cat5e and Cat5 LANs
No Tools Required to Connect Pre-terminated Cables
Used for Voice, Home Networking, Home Office, Audio, Video and More
Gold Plated Contacts & Snap-in Retaining Clip for Secure/Corrosion Free Connection
100% Factory Tested to Exceed Industry Standard Performance

Connector system for use with power modules, giving quick and simple installation.
3 pole male and female pre-moulded connectors with 1.5mm2 cable up to 7m
Cable lengths over 7m are 2.5mm2 cable due to voltage drop
Separate system for dedicated power supplies can be supplied upon request

≤0.5dB(Typical) Low Insertion Loss
Zirconia Ceramic Sleeve with High-precision Alignment
Protective Dust Cap Keeps Adapter’s Interior Clean from Dust
Stainless Steel Clips for Tool-less Snap-in Installation
Available in A Variety of Connector Types
Can be Used with M2 Model Screw

P/N: 601120 + KEJ-C5E-S-TL(2)
2 keystone jacks included (KEJ-C5E-S-TL)
angled entry
Each port protected with a dust-proof shutter
Fully compliant with Legrand® MosaicTM single and dual frames P/N 078802 + 080251, 078804 + 080252, 078806 + 080253, 078808 + 080254
Suitable for duct and channel systems of other manufacturers such as Legrand, OBO Bettermann, Elektraplan Niedax, etc
Central module: 45x45 mm
Color: white RAL9003
Surface: shiny
Required installation deptH:30 mm

P/N: 601122 + KEJ-C6-S-TL(2)
2 keystone jacks included (KEJ-C6-S-TL)
Angled entry
Each port protected with a dust-proof shutter
Fully compliant with Legrand® MosaicTM single and dual frames P/N: 078802 + 080251, 078814 + 080252, 078816 + 080253, 078818 + 080254