≤0.5dB(Typical) Low Insertion Loss
Zirconia Ceramic Sleeve with High-precision Alignment
Protective Dust Cap Keeps Adapter’s Interior Clean from Dust
Stainless Steel Clips for Tool-less Snap-in Installation
Available in A Variety of Connector Types
Can be Used with M2 Model Screw

88530
PVC (Riser) Flame-retardant Jacket
Precision Zirconia Ferrule Connectors Ensure Low Loss
Duplex Clip Prevents the Fiber from Rotating and Maintains the Polarity
G.657.A1 Bend Insensitive Fiber & 10mm Min. Bend Radius
Optical Testing Ensures Network Performance
Compliant to TIA-604 (FOCIS)

Material HIPS Flame
Capacity 6 Fibers
Dimensions (HxWxD) 0.52"x3.83"x3.31" (13.3x97.2x84mm)
Life :1000 times
Tensile Strength: >1000N
Working Temperature: -40 to 55°C (-40 to 131°F)
Relative Humidity: ≤ 85% (30°)
Air Pressure: 70Kpa~106Kpa
Sealing Performance: Remain Unchanged for 72h on Pressure 70kpa
Application: Fiber Splice Enclosure,Fiber Termination Box,Cable Distribution Box

Configuration Type: Cassette Cleaner
Applicable Connector: LC/SC/FC/ST/MU/D4/DIN Connector
Cleaning Level: 100
Dimension: 115mmx79mmx32mm
Part Number: FOCC-301/FCRS-301
Durability: 500 cleans
Tape Replaceable: Yes
Weight: 300g

FS P/N: FS12SM-SCU-CP-2M-PVC
PVC Flame-retardant Fiber Optic Cable with Tight-buffered Coating on Each Optical Fiber
Optical Testing Guarantees Insertion Loss and Returns Loss
Individually Colored to Easily Match Color-coded Fiber Cable That Will Be Spliced
Pass All IEC-61754 and TIA-609 (FOCIS) Performance Requirements
Support Both Fusion and Mechanical Splicing for Fiber Cabling System

The WI-MC101M is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media or vice versa. Adopting WDM technology, WI-MC101M takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the WI-MC101M is designed for use with single-mode fiber cable utilizing the SC-Type connector. It supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the WI-MC101M should work at 1550nm on transferring data and at 1310nm on receiving data. It has auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port. The WI-MC101M will transmit at extended fiber optic distances utilizing single-mode fiber up to 25 kilometers.
Top Features
25KM 100Mbps Single Fiber Optic Media Converter
Ambient temperature: 0 ~ +50°C Storage temperature: -20 ~ +70°C Humidity: 5% ~ 90%
Connector: UTP: RJ-45,10/100Mbps; Fiber: SC,100Mbps
Support Tag-VLAN,Port-VLANs
Supports up to 2k byte JUMBO frame
Apart from these, you can find manifold other smarter features and we at Cohesive Technologies give you the best options.